Table of Contents
Advertisement
Error Codes
If an error is detected, the scanner will sound a long low tone (for
three seconds) and flash its LED, indicating a failure. When this
occurs, press the Scanner button to hear the error code. If it is
configured to do so, the scanner will sound a series of beeps cor-
responding to the error code and/or flash its LED simultaneous
to the beeps. The table below describes what these codes mean
and what action should be taken for each.
NUMBER OF
LED FLASHES/
BEEPS
1
2
6
10
11
13
Quick Reference Guide
ERROR
Configuration
Host Interface
Main PCB
Button Error
USB Device
CPLD ID
CORRECTIVE ACTION
Contact Helpdesk for assis-
tance
9
Advertisement
Table of Contents
