Table of Contents
Advertisement
Dismounting or formatting the FlashFX drive will erase all files and program stored in
the drive.
CAUTION
Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select
one item with the stylus, another item is erroneously selected).
To recalibrate the touch screen, complete the following steps:
Product Reference Guide
1. Select
Start > Settings > Control
Panel > Storage Properties
2. From the
Store Info
list, select the desired storage
device.
3. You can also format, dismount,
and create partitions on storage
devices using this control panel.
4. To save and exit the
control panel, tap
Properties
on the control bar, or press
on the keypad.
<Enter>
1. Select
menu
Start
dialog as shown in Figure 2-22 on page 2-34.
Properties
2. Adjust
Double-Tap
3. Select the
Calibration
.
pull-down
Storage
OK
> Settings > Control Panel > Stylus
sensitivity if needed or desired.
tab to open the
Calibration
Stylus Calibration
to open the
Stylus
application.
2-33
Advertisement
Table of Contents
