Reader Configuration; Auto-Calibration - Datalogic Matrix 300N Series Product Reference Manual

READER CONFIGURATION

For an example of Matrix device configuration see the example in
NOTE
When all the configuration parameters are set correctly and saved to the device, you
can perform a Backup to File and/or to an External storage device (BM100, etc.). See
Backup and Restore Through DL.CODE.
NOTE

Auto-Calibration

DL.CODE provides the Image Auto-Setup tool to maximize the reading performance by
tuning the acquisition parameters (photometry) automatically. By selecting the Image
Auto-Setup tool from the Image Settings branch in the Advanced Setup step, the follow-
ing window appears:
Select the Static or Dynamic Self-Tuning option; Start Image Auto-Setup and Apply to
the Image Settings. The Advanced Setup window works interactively so that you can see
the results of the parameter setting changes as well as the decoding results (Results
panel).
Especially for lengthy configurations, it is always good practice to period-
ically save the configuration to permanent memory (Save on Device) to
avoid losing the configuration in Temporary Memory. You must give a
name to the new configuration or overwrite an existing one (except for
Default which cannot be modified).
An improvement in the Matrix N Family readers allows them to contain
several configurations or jobs in permanent memory.
This means that in addition to your application configuration(s), the
Default configuration is always present on the reader and in fact it is not
modifiable and cannot be deleted.
Figure 87 Image Auto-Setup
-
PRODUCT REFERENCE GUIDE
READER CONFIGURATION
, Steps 5-6.
Chapter 1
135