Standard 2 Of 5 Correlation - Datalogic Magellan 1500i Product Reference Manual

Standard 2 of 5 Correlation

Standard 2 of 5 Correlation
Enables/disables character correlation for Standard 2 of 5.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
059301(CR)
Standard 2 of 5 Correlation = Enable
Product Reference Guide
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
059300(CR)
Standard 2 of 5 Correlation = Disable
245