Panasonic KX-NS1000 Pc Programming Manual page 653

11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
DND Mode
Specifies whether extensions in DND mode ring when a call is received at the incoming call distribution group.
Default
No Ring
Value Range
No Ring, Ring
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Manual References
10.1.2 ICD Group Features—Group Call Distribution
Tenant Number
Specifies the tenant to which the incoming call distribution group belongs, to determine the Time Table and
the audio source for the group. (The tenant number corresponds to the Time Table number.)
Default
1
Value Range
1–32 or 1–128
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
number of tenants is 128. If the SIP Extension Type or IP-Extension Type was selected, the maximum
number of tenants is 32. For details, refer to 5.4.1 Easy Setup Wizard in the Installation Manual.
Maintenance Console Location
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
10.4 PBX Configuration—[2-4] System—Week Table
14.6 PBX Configuration—[6-6] Feature—Tenant—
Feature Manual References
13.1.4 Music on Hold
Document Version 2016-03
Music On Hold
PC Programming Manual 653