Panasonic KX-NS1000 Pc Programming Manual page 941

Note
Each caller's replies to an interview session are saved as one message.
Default
Not stored
Value Range
2–[the value set in
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
Feature Manual References
20.1.49 Unified Messaging—Interview Service
All Calls Transfer to Mailbox
If this parameter is set to "Yes", the extension is considered to be a Logical Extension and therefore calls
directed to the extension via Automated Attendant service are automatically forwarded to the extension
mailbox. The extension does not ring when a call is received.
Default
No
Value Range
No, Yes
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
Feature Manual References
20.1.6 Unified Messaging—Automated Attendant (AA)
Call Transfer Sequence (Selection)
Specifies the method for the Call Transfer Sequence used by the mailbox. Allows each mailbox to be assigned
its own Call Transfer Sequence (Personal Transfer Sequence).
Note
This sequence has higher priority than the alternate extension transfer sequence specified in 24.4 UM
Configuration—[5-4] System Parameters—Parameters—PBX Parameters—
Environment—Alternate Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;]).
Default
System
Value Range
System, Other
Document Version 2016-03
Mailbox No. Max. Length (3-8)] digits
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PBX
PC Programming Manual 941