Um Configuration-[4-3] Service Settings-Custom Service-Menu & Transfer - Panasonic KX-NS1000 Pc Programming Manual

23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
23.3.1 UM Configuration—[4-3] Service Settings—Custom
Service—Menu & Transfer
The below parameters are set for the Menu Transfer Custom Service in the Custom Service Builder.
This Custom Service type guides callers to press certain buttons to connect themselves with the designated
party. The prompt for this service can be recorded in the CS No. dialog box.
Custom Service prompts can be recorded only in On-line mode.
Description
The information typed in this field is for reference only.
Default
Not stored
Value Range
Max. 32 characters
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Feature Manual References
20.1.27 Unified Messaging—Custom Service
Prompt Mode
Specifies the language for prompts used by this Custom Service.
Note
•
This parameter overrides a set "Incoming Call Service Prompt".
•
If "Primary" is selected, the default language which is selected from all installed languages will be used.
•
If "None" is selected, the prompt mode of previous process will be continued, or "Primary" language
will be selected.
Default
Primary
Value Range
None, Primary, Guidance No. 1-8
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group—
Break Mode - Incoming Call Service Prompt
1020 PC Programming Manual
Day, Night, Lunch, and
Document Version 2016-03