Panasonic KX-NS1000 Pc Programming Manual page 293

Mode2: Searches SIP accounts, then DID numbers. Searches the SIP CO lines of the tenant of the
search-matched DID number, in ascending order (Low ® High).
Mode 3: Searches SIP accounts, then DID numbers. Searches the SIP CO lines of the tenant of the
search-matched DID number, in descending order (High ® Low).
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
Symmetric Response Routing Ability
Enables this feature to request that the SIP server sends the response back to the source IP address and port
from which the request originated.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
100rel Ability
Specifies whether to add the option tag 100rel to the header field of the INVITE message.
Default
Enable (Passive)
Value Range
Disable: This feature is not activated.
Enable (Active): Activates this feature only if the other device supports the feature.
Enable (Passive): Activates this feature only when requested by the other device.
Maintenance Console Location
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Default
Disable
Value Range
Disable, Enable
Document Version 2016-03
9.9 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Shelf Property
PC Programming Manual 293