Panasonic KX-NS1000 Pc Programming Manual page 1013

Value Range
1–30 s
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Manual References
20.1.6 Unified Messaging—Automated Attendant (AA)
Alternate Extension
Specifies extensions that require a different transfer sequence than normal. Calls to these extensions will be
transferred according with the setting for 24.4 UM Configuration—[5-4] System
Parameters—Parameters—
digits / [0-9 * # D R F T X , ;]).Click Edit and follow the steps below to edit an alternate extension.
Adding an Alternate Extension
1.
Click New.
2.
Enter an extension number.
3.
Click OK.
Editing an Alternate Extension
1.
Select the desired alternate extension.
2.
Click Edit.
3.
Edit the extension number.
4.
Click OK.
Deleting an Alternate Extension
1.
Select the desired alternate extension.
2.
Click Delete.
3.
Click Yes.
Changing the order of Alternate Extensions
Select an extension and click Move up or Move down to change its order in the list. Alternate extensions will
be dialed in order from top to bottom.
Note
Extension Groups and Logical Extensions cannot be assigned.
Default
Not applicable
Value Range
Max. 32 extensions (max. 5 digits per extension)
PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—
Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;])
Document Version 2016-03
23.2 UM Configuration—[4-2] Service Settings—Parameters
PBX Environment—Alternate Extension Transfer Sequence (Up to 16
PBX Environment—Alternate Extension
PC Programming Manual 1013