Local IP Address
Specifies the IP address of equipment on the LAN.
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
LAN Port Start
Specifies the start port for the LAN port range.
If ICMP is selected for
Note
•
If neither the start port nor the end port is set, any port can be used.
•
The user cannot reserve system ports for the WAN side.
•
If a range is set, ensure that the number of internal ports and external ports match each other.
Default
Blank
Value Range
1–65535
Maintenance Console Location
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
LAN Port End
Specifies the end port for the LAN port range.
If this setting is blank, only the port set for
If ICMP is selected for
Note
•
If neither the start port nor the end port is set, any port can be used.
•
The user cannot reserve system ports for the WAN side.
•
If a range is set, ensure that the number of internal ports and external ports match each other.
•
Ensure that the end range value is greater than the start range value.
Default
Blank
Value Range
1–65535
Document Version 2016-03
Protocol, this item is grayed out.
LAN Port Start is available for port forwarding.
Protocol, this item is grayed out.
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
PC Programming Manual
1123