Router Configuration-Vpn-[3-1] Vpss - Panasonic KX-NS1000 Pc Programming Manual

27.9 Router Configuration—VPN—[3-1] VPSS
27.9 Router Configuration—VPN—[3-1] VPSS
VPSS
Selects whether to enable VPSS (VPN Simple Setting).
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Master Site IP Address (WAN)
Specifies the IP address of the master site.
If Disable is selected for VPSS, this setting cannot be configured.
If Enable is selected for VPSS, this setting must be configured.
If setting from a Slave unit connected to a Master unit, this setting becomes reference only.
This setting must be made from a Slave unit (including a Backup master) that is not connected to a Master
unit.
Default
Blank
Value Range
Blank, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Slave Site—Site No.
Selects the site number.
If Disable is selected for VPSS, this setting cannot be configured.
Default
1
Value Range
1–16
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
1148 PC Programming Manual Document Version 2016-03