Panasonic KX-NS1000 Pc Programming Manual page 827

Value Range
Max. 32 digits (consisting of 0–9, *, #, [ ] [Secret], and P [Pause])
Maintenance Console Location
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
Feature Manual References
6.1.12 External Sensor
Tenant No.
Specifies the tenant to which the sensor belongs, to determine the Time Table for the sensor. (The tenant
number corresponds to the Time Table number.)
Default
1
Value Range
1–32
or
1–128
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
number of tenants is 128. If the SIP Extension Type or IP-Extension Type was selected, the maximum
number of tenants is 32. For details, refer to 5.4.1 Easy Setup Wizard in the Installation Manual.
Maintenance Console Location
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Manual References
6.1.12 External Sensor
19.1.2 Tenant Service
Sensor Alarm—Email notification
Enables e-mail notification when the sensor detects an alarm.
Default
Enable
Value Range
Enable, Disable
Document Version 2016-03
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
PC Programming Manual 827