Panasonic KX-NS1000 Pc Programming Manual page 238

9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
LLDP Packet Sending Ability
Specifies whether the PBX notifies IP-CSs (KX-NS0154 only) to enable or disable the ability to send and receive
LLDP packets.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
IP Terminal Registration Mode
Specifies the IP terminal registration mode for registering IP telephones to the PBX.
Default
Manual
Value Range
Manual, Full Automatic, Extension Input
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Installation Manual References
5.4.1 Easy Setup Wizard
IP-CS Registration Mode
Specifies the registration mode for registering IP-CSs to the PBX.
Default
Full Automatic
Value Range
Manual, Full Automatic
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
SIP over TCP/IP (V-SIPGW) *)
Specifies whether or not to use SIP over TCP/IP protocol for the site. When this setting is enabled, SIP CO
lines cannot use the UDP/IP protocol.
238 PC Programming Manual Document Version 2016-03