Panasonic KX-NS1000 Pc Programming Manual page 465

Hide thumbs Also See for KX-NS1000:

Table of Contents

Programming Card Properties for cards installed in legacy gateways

For your reference, the following information is included on each Card Property screen for cards installed in

legacy gateways:

Site: The site number of the KX-NS1000 PBX to which the legacy gateway is connected.

Shelf: The shelf number of the STACK-M card Legacy Gateway connection:

2: Legacy-GW1

3: Legacy-GW2

Slot: The physical slot number within the legacy gateway where the card is installed.

Programming Port Properties for cards installed in legacy gateways

When programming KX-TDE/KX-NCP/KX-TDA PBXs using the Unified PC Maintenance Console, a

Command button is available to change the status (INS/OUS) of ports being programmed. To change the

status of a port when programming via Web Maintenance Console, click the desired cell in the Connection

column, and then select INS or OUS for the port.

Document Version 2016-03

9.28 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2

PC Programming Manual