Panasonic KX-NS1000 Pc Programming Manual page 819

Enable (Get DISA): CO line-to-public CO line calls are established using DISA, and DISA can be used to detect
the end of the call.
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—
with DISA—DISA to Public CO
CO-CO with DISA—Fwd/Transfer to Private Network
Enables CO line-to-private CO line calls to be established using DISA.
Default
Disable
Value Range
Disable: CO line-to-private CO line calls are established without using DISA.
Enable (Get DISA): CO line-to-private CO line calls are established using DISA, and DISA can be used to
detect the end of the call.
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—
with DISA—DISA to Private Network
CO-CO with DISA—Transfer by DTMF "#" (Activation Key Required)
Specifies whether an outside party such as a cellular phone can transfer a CO line call to an extension within
the PBX by dialing "#" + extension number.
Default
Disable
Value Range
Disable: "#" is ignored if dialed.
Enable (as "Flash"): The current CO line call will be placed on hold, then transferred to the extension whose
number is entered.
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Document Version 2016-03
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
CO-CO
CO-CO
PC Programming Manual 819