Pbx Configuration-[1-2] Configuration-Portable Station - Panasonic KX-NS1000 Pc Programming Manual

9.30 PBX Configuration—[1-2] Configuration—Portable Station
9.30 PBX Configuration—[1-2]
Configuration—Portable Station
Various portable station (PS) settings can be programmed.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used. Programming
instructions of the PBX are given below; programming instructions of the PS are found in the Installation
Manual.
It is possible to de-register the PS later.
PS Registration, De-registration, and Forced De-registration can be performed only in On-line mode.
Registration
Follow the steps below to register the PS.
1.
Click Registration.
A dialog box will appear. Non-registered (available) extension numbers and names are displayed on the
left.
2.
Highlight numbers and names and click the right arrow to select them for registration. Click Next.
3.
Highlight PBX sites and click the right arrow to select them for registration. Click Next.
4.
If the registration is still in progress, the dialog box will show "Registration Executing".
If the registration is successful, the dialog box will show "Registration Completed". Click Close.
Once a PS is successfully registered, the status of the PS will update to show "Registered".
De-registration
Follow the steps below to de-register the PS.
1.
Click De-registration.
A dialog box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for de-registration. Click Next.
A dialog box will appear.
3.
Click Confirm.
If the de-registration is successful, the dialog box will show "De-registration Succeed".
4.
Click Close.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful or
de-registration has been performed only on the PS.
1.
Click Forced De-registration.
A dialog box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for forced de-registration. Click
Next.
A dialog box will appear.
3.
Click OK.
A dialog box will appear.
4.
Click Confirm.
If the de-registration is successful, the dialog box will show "Forced De-registration Succeed".
470 PC Programming Manual Document Version 2016-03