Panasonic KX-NS1000 Pc Programming Manual page 1124

27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
Maintenance Console Location
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
Protocol Setting
ICMP (WAN/LAN)—Send ICMP Redirect
Selects whether to send ICMP redirect messages.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
ICMP (WAN/LAN)—Allow ICMP Redirect
Selects whether to enter a new IP address in the routing table in accordance with ICMP redirect message.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.3.1 Router Configuration—Setup—[1-3-1] LAN—IPv4
1124 PC Programming Manual Document Version 2016-03