Panasonic KX-NS1000 Pc Programming Manual page 1019

[From the Custom Service Diagram]
1.
Double-click the desired Custom Service icon in the diagram, or right-click on the desired icon and select
Edit.
2.
Edit the parameters in the Custom Service parameters dialog box.
3.
Click OK.
Example: Setting "Menu & Transfer"
1.
Click Menu & Transfer under Custom Service Type and drag it to the right side of the screen.
2.
Drop Menu & Transfer on to a position of your choice in the Custom Service diagram. The parameters
dialog box for the Custom Service opens.
3.
Enter or select a value for each item.
For each parameter, refer to the description in the following section.
4.
Click Record A Prompt For This Custom Service.
This feature is only available when setting "Menu & Transfer" or "Password". You can also skip this step,
and go to step 7.
5.
Select Record from extension or Import from recorded file.
When Record from extension is selected:
1.
Specify the extension number of the telephone used for recording, then click Connect.
2.
When the specified extension rings, go off-hook.
3.
Click Record, Play, or Stop to record or play a voice label through the extension.
4.
Click Disconnect.
5.
Click OK.
When Import from recorded file is selected:
1.
Click the folder icon.
The Open dialog box appears.
2.
Navigate to the folder containing the WAV files you want to open.
WAV files must meet the following specifications:
–
G.711 PCM codec
–
8 kHz, 8-bit sampling rate
–
Monaural
–
A-law or µ-law encoding
3.
Select the desired WAV file.
4.
Click Open.
6.
Click OK.
7.
Click OK.
Document Version 2016-03
23.3 UM Configuration—[4-3] Service Settings—Custom Service
PC Programming Manual 1019