Pbx Configuration-[3-12-2] Group-Vm(Dtmf) Group-Group Settings - Panasonic KX-NS1000 Pc Programming Manual

11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF)
Group—Group Settings
A VM (DTMF) group has a floating extension number, and can be assigned as the destination for redirected
calls and incoming calls. To assign members to the group, click Member List. To view a list of all programmed
extension numbers and types, click Extension List View (see 6.4 Tool—Extension List View).
Notice
This screen is for programming legacy gateway PBXs. For information about setting up a legacy gateway
PBX, see 9.28 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.
Unless noted otherwise, the programming information is the same as described in the PC Programming
Manual of the legacy gateway PBX. Refer to the corresponding Group—VM(DTMF) Group—Group
Settings section in the PC Programming Manual of the legacy gateway PBX for more information.
700 PC Programming Manual Document Version 2016-03