Pbx Configuration-[3-12-2] Group-Vm(Dtmf) Group-Group Settings-Member List - Panasonic KX-NS1000 Pc Programming Manual

11.12.2.1 PBX Configuration—[3-12-2] Group—VM(DTMF)
Group—Group Settings—Member List
Select the group to program from the VM(DTMF) Group Number list.
To assign members to the group, enter directly or click Extension No. Setting (see 2.1.7 Extension Number
Setting). To copy members to another group, click Member list copy, select the group, and then click OK.
Notice
This screen is for programming legacy gateway PBXs. For information about setting up a legacy gateway
PBX, see 9.28 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.
Unless noted otherwise, the programming information is the same as described in the PC Programming
Manual of the legacy gateway PBX. Refer to the corresponding Group—VM(DTMF) Group—Group
Settings—Member List section in the PC Programming Manual of the legacy gateway PBX for more
information.
Only ports set to VM(DPT) for DPT Type—Type in the extension's Port Property screen will be displayed. For
details, see To access port properties in 9.1 PBX Configuration—[1-1] Configuration—Slot.
The Site, Shelf, and Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Document Version 2016-03
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
PC Programming Manual 701