Panasonic KX-NS1000 Pc Programming Manual page 1149

Slave Site—Slave Site
Specifies whether to display/change the status of the slave site specified in Site No.. This setting is displayed
only when programming the Master unit. Clicking the Export button for a Slave unit on the Master unit allows
the VPSS setting file to be exported to the Slave unit.
If Disable is selected, you cannot click the Export button.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
VPSS—Advanced Setting
Click here to open the advanced setting menu for VPSS.
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
VPSS - Advanced
Additional LAN on VPN Tunnel sharing (MAX 4 Entries)—Local Network
Address
Specifies the local IP address at an adjacent segment or satellite office for use in VPN tunnel sharing. Up to
4 addresses can be specified (#1–#4).
Default
Blank
Value Range
Blank, 1.0.0.0–223.255.255.255
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Additional LAN on VPN Tunnel sharing (MAX 4 Entries)—Subnet Mask
Specifies the subnet mask at an adjacent segment or satellite office for use in VPN tunnel sharing. Up to 4
addresses can be specified (#1–#4).
Default
Blank
Value Range
Blank, 0.0.0.0–255.255.255.255
Document Version 2016-03
27.9 Router Configuration—VPN—[3-1] VPSS
PC Programming Manual 1149