Panasonic KX-NS1000 Pc Programming Manual page 320

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
FAX Sending Method
Specifies the method of transporting the fax signal.
Default
G.711 Inband
Value Range
G.711 Inband, T.38
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Default
No Speed Limit
Value Range
No Speed Limit, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. This feature enables end-to-end fax signal relay when
the other party prefers a codec other than G.711. This feature functions only if the other party supports G.711.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
DTMF
Specifies the method to transport DTMF tones.
Default
Outband (RFC2833)
320 PC Programming Manual Document Version 2016-03