Pbx Configuration-[1-3] Configuration-Option - Panasonic KX-NS1000 Pc Programming Manual

9.31 PBX Configuration—[1-3] Configuration—Option
9.31 PBX Configuration—[1-3]
Configuration—Option
System options can be programmed.
System Wireless—System ID
Indicates the radio system ID used to register a PS (reference only).
To clear the System ID
1.
Click the Clear Master CS button.
2.
A warning will be displayed. Confirm the contents of the warning, and then click Yes.
Note
The System ID can be cleared using this procedure only in Off-line mode.
Default
Not stored
Value Range
Not applicable.
Maintenance Console Location
9.31 PBX Configuration—[1-3] Configuration—Option
System Wireless—CO Status Display in Standby (KX-WT125/126 only) (Need
System Restart)
Selects whether to display the CO status on the LCD of the PS when in stand-by mode (KX-WT125/
KX-WT126 only).
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
9.31 PBX Configuration—[1-3] Configuration—Option
New Card Installation—Card Status for any Card
Selects the initial status of cards after installation.
Default
In Service
Value Range
In Service, Out of Service
474 PC Programming Manual Document Version 2016-03