Panasonic KX-NS1000 Pc Programming Manual page 1022

23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Wait for First Digit (0-10 s)
Specifies the length of time that the system waits for the caller to dial the first digit after a Custom Service menu
is played for the caller. If this time expires, the No DTMF Operation settings determines how the call is then
handled. If this parameter is set to "0", No DTMF Input Operation handles the call immediately after the menu
is played for the caller.
Default
6 s
Value Range
0–10 s
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Feature Manual References
20.1.27 Unified Messaging—Custom Service
Wait for Second Digit (1-5 s)
This parameter is only valid when Call Transfer Anytime is set to a value other than "No". After the caller dials
a digit (the first digit) after listening to a Custom Service menu, the system waits for a second digit to be dialed.
This gives the caller time to continue dialing a mailbox number, extension number, or PIN. If this time expires
without a second digit being entered, the system assumes the caller has selected a Custom Service menu
option and handles the call according to the digit dialed by the caller.
Default
1 s
Value Range
1–5 s
Maintenance Console Location
23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Feature Manual References
20.1.27 Unified Messaging—Custom Service
No DTMF Input Operation
Determines how calls are handled when callers do not dial any numbers after listening to the menu message
(most likely because they are using rotary telephones) The default setting is "Operator", which allows the caller
to be automatically connected to an operator after the menu message plays back ("Press the desired number,
or stay on the line to be connected to an operator.").
Default
Operator
1022 PC Programming Manual Document Version 2016-03