Panasonic KX-NS1000 Pc Programming Manual page 1108

27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
PPP Keep-Alive
Selects whether Keep-Alive is enabled or not.
When the server of the ISP is disconnected for some reason, this function keeps the PPPoE Connection alive
automatically.
Default
LCP ECHO
Value Range
LCP ECHO: Select to detect PPPoE link failures.
ICMP: Select to detect network failures.
Disable: Disables this setting.
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Advanced Setting
Click here to open the advanced setting menu for PPPoE - Advanced.
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
PPPoE - Advanced
MTU
If the MTU value is assigned by the ISP, set it here (1280–1492).
If the MTU value is outside of the value range below, 1280 or 1492 is displayed.
Default
1452
Value Range
1280–1492
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Connection on Demand
When PPPoE for IPv6 is used to connect to the ISP, this setting is always set to Enable.
Default
Disable
Value Range
Enable, Disable
1108 PC Programming Manual Document Version 2016-03