9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
Default
0
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T320
Specifies the maximum time that the PBX waits for packet protocol.
Default
0
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T322
Specifies the maximum time that the PBX waits for a reply after sending the Status enquiry message.
Default
40
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
ISDN Extension—T3D3
Specifies the length of time that the PBX tries to establish L2 in "Permanent" mode.
Default
300
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
450
PC Programming Manual
Document Version 2016-03