Panasonic KX-NS1000 Pc Programming Manual page 302

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Subscriber Number
Specifies the number used as the CLIP number.
Default
Not stored
Value Range
Max. 16 digits (consisting of 0–9,
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Backup
Specifies if the port will be used in Master Backup mode to perform the functions of a port on the Master unit
PBX when the Master unit PBX fails.
Default
Normal
Value Range
Normal, Backup
Note
The "Backup" setting is only effective when the site the card is installed in is designated as the Master
Backup unit.
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual References
1.2.3.1 One-look Networking Survivability
Feature Manual References
14.1.6 ONE-LOOK NETWORKING SURVIVABILITY FEATURES
P2P Group
Specifies the peer-to-peer group of the IP CO line.
Default
1
302 PC Programming Manual
, and #)
Document Version 2016-03