Panasonic KX-NS1000 Pc Programming Manual page 888

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
15.1.12 PRIVATE NETWORK FEATURES
Distribution Method
Selects the distribution method for incoming CO line calls. The value range of this setting depends on the card
type and Trunk Property assigned for each CO line.
Default
For LCOT2 card: DIL
For PRI23 or V-SIPGW card: DDI/DID
For V-IPGW card: TIE
Value Range
DIL: Distribution depends on the CO line through which the calls arrive
DDI/DID: Distribution depends on the DID number of the calls
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
CLI Ring for DIL—Day, Lunch, Break, Night
Enables CLI distribution in each time mode.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
5.1.8 DIL (Direct In Line)
4.1.14 CLI (Calling Line Identification) Distribution
888 PC Programming Manual Document Version 2016-03