9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Trunk Property
Selects the CO line property of the port.
Default
Public
Value Range
Public: Public network
Private: Private Network
VPN: Virtual Private Network
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Manual References
15.1.12 PRIVATE NETWORK FEATURES
460
PC Programming Manual
Document Version 2016-03