Panasonic KX-NS1000 Pc Programming Manual page 600

10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
15.1.12 PRIVATE NETWORK FEATURES
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
Enables the transfer of related CLIP information when a party on hold is transferred. When set to "Enable", the
transfer destination will receive the original caller's CLIP information, not the information of the extension that
performed the transfer.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
Send CLIP of CO Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling party or the CLIP number of the forwarding extension or virtual
PS is sent to the forwarding destination to identify the origin of a CO line call.
Default
Enable
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
10.1.4 ICD Group Features—Outside Destinations
4.1.15 CLIP (Calling Line Identification Presentation)
15.1.15 Private Network Features—Network ICD Group
Send CLIP of Extension Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling extension or the CLIP number of the forwarding extension or
virtual PS is sent to the forwarding destination to identify the origin of a call.
Default
Enable
600 PC Programming Manual Document Version 2016-03