DISA—Disconnect Timer after Intercept
Specifies the length of time that an intercepted DISA call rings at the intercept routing destination before being
disconnected.
Default
60
Value Range
0–60 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a CO-to-CO line call on a DISA line. (Selecting "0"
enables the caller to prolong the CO-to-CO line call without restriction.)
Default
10
Value Range
0–15
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Time
Specifies the length of time that a CO-to-CO line call on a DISA line is prolonged each time that the caller
prolongs the call. (Selecting "0" prevents the caller from prolonging the CO-to-CO line call.)
Default
3
Document Version 2016-03
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual
501