Panasonic KX-NS1000 Pc Programming Manual page 231

Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—GW Settings–Option 1—
Priority—1st, 2nd, 3rd
DTMF
Specifies the method to transport DTMF tones.
Default
Outband (H.245)
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Default
101
Value Range
96–127
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
GW Settings–Option 3
GW Name
Specifies the name of the destination gateway device for programming reference.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Document Version 2016-03
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
IP Codec
PC Programming Manual 231