Panasonic KX-NS1000 Pc Programming Manual page 1062

24.4 UM Configuration—[5-4] System Parameters—Parameters
Caller Recorded Name Announce Mode
Determines whether or not the system announces the caller's name during paging. (In order for the name to
be announced, it must be recorded beforehand.)
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Manual References
20.1.48 Unified Messaging—Intercom Paging
Fax Management
You can program the system to automatically detect incoming fax calls and forward those calls to a fax
extension. You can specify a maximum of 2 fax extensions as the destination for faxes; if the main fax extension
is not available to receive a fax, the system will forward the fax call to the alternate fax extension.
Automatic Transfer of Incoming Fax Call
Specifies the detection and destination of incoming fax calls.
Note
The system can detect incoming fax signals during the first 30 seconds after it answers incoming calls.
Default
Disable
Value Range
Disable, Transfer to Fax Extension, Receive Fax
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Manual References
20.1.38 Unified Messaging—Fax Server
Automatic Transfer of Incoming Fax Call—Mailbox Number
Specifies the mailbox to receive the fax if "Receive Fax" is selected for
Fax Call.
Default
Not stored
1062 PC Programming Manual
Automatic Transfer of Incoming
Document Version 2016-03