Panasonic KX-NS1000 Pc Programming Manual page 946

20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Default
No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Manual References
20.1.60 Unified Messaging—Message Waiting Notification—Telephone Device
Telephone Device—Device No. 1, 2, 3—Notification Type
Specifies the type of message for which notification is sent. Notification can be sent for all messages, or voice
messages or fax messages only.
Default
All Messages
Value Range
All Messages, Voice Messages, Fax Messages
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Manual References
20.1.60 Unified Messaging—Message Waiting Notification—Telephone Device
Telephone Device—Device No. 1, 2, 3—Only Urgent Messages
Specifies if notifications will be sent only for messages designated as urgent.
Default
No
Value Range
Yes, No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification Parameters
Feature Manual References
20.1.60 Unified Messaging—Message Waiting Notification—Telephone Device
Telephone Device—Device No. 1, 2, 3—Dial Number [0-9 * # T X , ;]
Assigns a telephone number to Device 1, 2, or 3. The subscriber can also specify the number to be dialed by
entering it from his or her telephone, allowing the subscriber to set this feature on a case by case basis.
946 PC Programming Manual Document Version 2016-03