Utility-Um - System Prompts Customization - Panasonic KX-NS1000 Pc Programming Manual

7.9 Utility—UM – System Prompts Customization
7.9 Utility—UM – System Prompts Customization
The System Prompts customization screen is used to view, play, add, or delete system prompts. The
programmer can also check the prompt number and text for these prompts.
This screen can be accessed only in On-line mode.
The following categories of system prompts can be customized from the System Prompts customization
screen:
a.
System Guidance
b.
Custom Service Menus
c.
Company Greetings
d.
Other
–
Company Name
–
Language Select Menu
–
Hold Announce Menu
–
Mailbox Group List
–
System Caller ID
To customize system prompts, select a tab in the System Prompts dialog box.
Notice
The system prompts initially installed on the Storage Memory Card cannot be restored to their original state
by initializing or resetting the PBX; any changes made to the initially installed system prompts cannot be
undone. Before changing any system prompts, perform a backup of the initial system prompt data. See
6.8 Tool—UM Data Backup for details. Then, you can restore the system prompts to their initial state by
restoring the backup data. See 6.9 Tool—UM Data Restore for details.
Deleting Prompts
The programmer is able to delete specified system prompts.
To delete a specific system prompt:
1.
Select the cell for the desired prompt number.
2.
Click Delete.
Recording System Prompts
1.
Select the desired system prompt to record, and click Play/Record.
2.
Select "Record from extension" or "Import from recorded file".
When "Record from extension" is selected:
1.
Specify the extension number of the telephone used for recording, then click Connect.
2.
When the specified extension rings, go off-hook.
3.
Click Record, Stop, or Play to record or play a system prompt.
4.
Click Disconnect.
5.
Click OK.
When "Import from recorded file" is selected:
1.
Click Browse.
The Open dialog box appears.
2.
Navigate to the folder containing the WAV files you wish to import.
WAV files must meet the following specifications:
–
G.711 PCM codec
–
8 kHz, 8-bit sampling rate
–
Monaural
–
A-law or µ-law encoding
3.
Select the desired WAV file.
4.
Click Open to import the file.
5.
Click OK.
158 PC Programming Manual Document Version 2016-03