Panasonic KX-NS1000 Pc Programming Manual page 299

Connection Attribute
Specifies whether to connect a port to a Trunk Adaptor or use it as a SIP gateway.
Default
SIP Provider
Value Range
SIP Provider, Trunk Adaptor
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Feature Manual References
19.1.6 Trunk Adaptor Connection
Trunk Property
Specifies the networking type of each SIP CO line.
Note
If Connection Attribute is set to Trunk Adaptor for the port, only Public will be available for this setting.
Default
Public
Value Range
Public, VPN (E.164)
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Channel Attribute
Specifies the channel property of each port to enable several sessions to be performed for one subscription
with the SIP provider.
Default
Not Used
Value Range
Basic channel: The subscriber channel that is assigned the SIP registration information.
Additional channel for SlotN (N=1–4) ChN (N=1–16): The subordinate channel that uses the same registration
information as a Basic channel for SIP sessions. Select the Slot number and the Basic channel number to
which the Additional channel belongs.
Not Used: The channel is not in use.
Note
•
The Basic channel and Additional channel can belong to different V-SIPGW16 cards.
Document Version 2016-03
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual 299