Pbx Configuration-[2-6-2] System-Numbering Plan-Quick Dial - Panasonic KX-NS1000 Pc Programming Manual

10.6.2 PBX Configuration—[2-6-2] System—Numbering
Plan—Quick Dial
Quick Dialing numbers are used to call extensions or outside parties, or access certain features without having
to dial their full numbers. It is possible to register Quick Dialing numbers that overlap with other registered
numbers (refer to "Automatic Rerouting of VoIP Calls to Public CO Lines" in the Feature Manual).
For more information on flexible numbering, see "7.1.4 Flexible Numbering/Fixed Numbering" in the Feature
Manual.
Use Quick Dial for CO rerouting during "Break" Mode.
Specifies whether Quick Dialing can be used to make a CO line call via an extension registered at another site
in a One-look network, when the Time Service mode is Break mode.
Default
Off
Value Range
On, Off
Maintenance Console Location
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
PC Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—
"Break" in Isolated Mode
Feature Manual References
16.1.1 Quick Dialing
19.1.3 Time Service
Use quick dial for rerouting to public CO when TIE line does not work.
Specifies whether Quick Dialing can be used for rerouting to a public CO line when a TIE line is not operating.
Default
Off
Value Range
On, Off
Maintenance Console Location
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Feature Manual References
16.1.1 Quick Dialing
Document Version 2016-03
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Switch Time Service to
PC Programming Manual 549