Panasonic KX-NS1000 Pc Programming Manual page 964

20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Value Range
Max. 20 digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Auto Login TRG No.
Specifies the CO line number for Automatic Login. When the Unified Messaging system receives a call on this
CO line, the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be unique
for each mailbox.
Default
Not stored
Value Range
1–96
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Auto Login DDI/DID, TRG No. Password Entry Requirement
Specifies if a password is required for entry when automatic login is performed using the trunk group number
or the DID number.
Default
Yes
Value Range
Yes, No
Notice
If this is set to "No", ensure that unauthorized third-parties are not allowed access to any extensions using
the specified trunk group number.
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
964 PC Programming Manual Document Version 2016-03