Panasonic KX-NS1000 Pc Programming Manual page 375

Extension Name
Specifies the extension name of the port.
Note
This setting cannot be changed on this screen until the port has been assigned as a secondary port using
the Set Secondary command. See Setting Secondary Ports above for details.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Default
Fault
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Phone Location
Specifies the type of extension connected to the port.
Default
Local
Value Range
Local: The extension is located on the same network as the PBX (standard configuration).
Remote (MRG): The extension is accessing the PBX remotely (use Media Relay Gateway).
Document Version 2016-03
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
PC Programming Manual 375