Panasonic KX-NS1000 Pc Programming Manual page 893

Maintenance Console Location
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Programming Manual References
18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI/DID Table—Name Generate
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
DDI / DID Destination—Day, Lunch, Break, Night
Specifies the DID destination in each time mode.
Default
Not stored
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
18.3.1 PBX Configuration—[10-3] CO & Incoming Call—DDI/DID Table—Automatic Registration
Feature Manual References
5.1.7 DID (Direct Inward Dialing)
15.1.12 PRIVATE NETWORK FEATURES
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending on the time
of day.
Default
1
Value Range
1–32
or
1–128
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
Document Version 2016-03
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Option—DDI/DID Number & Name
PC Programming Manual 893