27.1.1 Router Configuration—Setup—[1-1-1] Router Information—Connection Status
27.1 Router Configuration—Setup—[1-1] Router
Information
27.1.1 Router Configuration—Setup—[1-1-1] Router
Information—Connection Status
Connection Status
This screen shows the connection status of the built-in router function.
Maintenance Console Location
27.1.1 Router Configuration—Setup—[1-1-1] Router Information—Connection Status
Connection Mode
Indicates the connection mode of the WAN (reference only).
Default
Static IP
Value Range
Disable, Static IP, DHCPc, PPPoE
Maintenance Console Location
27.1.1 Router Configuration—Setup—[1-1-1] Router Information—Connection Status
Router Status
Indicates the operation status of the router function (reference only).
If Disable is selected for Connection Mode, "Out-of-Service" is displayed.
Default
Out-of-Service
Value Range
In-Service, Out-of-Service, Fault
Maintenance Console Location
27.1.1 Router Configuration—Setup—[1-1-1] Router Information—Connection Status
WAN IP Address
Indicates the IP address of the WAN (reference only).
If Disable is selected for Connection Mode, information will not be displayed on this screen.
Default
Blank
1090
PC Programming Manual
Document Version 2016-03