Pbx Configuration-[6-1] Feature-System Speed Dial - Panasonic KX-NS1000 Pc Programming Manual

14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.1 PBX Configuration—[6-1] Feature—System
Speed Dial
The System Speed Dialing Table is used to store frequently dialed numbers as well as callers who should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialing Table is available for all extension users when making or receiving a call.
In Basic Memory, a maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature
numbers) can be programmed with other related parameters. 100 numbers are displayed at a time. To display
other sets of numbers, click the applicable tab.
Memory
Selects the System Speed Dialing Table to be programmed. Whether a tenant uses the basic System Speed
Dialing Table or the additional table depends on the setting of
Configuration—[6-6] Feature—Tenant.
Default
Basic Memory
Value Range
Basic Memory: the standard table
Expansion for Tenant 1–32 or 1–128: additional tables
Note
•
If "Expansion for Tenant" is selected, and the PBX has been setup using the System Resource
Type configuration, a maximum of 300 System Speed Dialing numbers can be saved for each tenant.
For details, refer to 5.4.1 Easy Setup Wizard in the Installation Manual
•
The maximum number of time tables (1 per tenant) depends on the System Capacity Selection setting
made when the Easy Setup Wizard was run for the PBX. If the System Resource Type was selected,
the maximum number of tenants (and therefore, time tables) is 128. If the SIP Extension Type or
IP-Extension Type was selected, the maximum number of tenants is 32. For details, refer to
5.4.1 Easy Setup Wizard in the Installation Manual.
Maintenance Console Location
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Programming Manual References
14.6 PBX Configuration—[6-6] Feature—Tenant—
Feature Manual References
18.1.9 Speed Dialing, Personal
18.1.10 Speed Dialing, System
4.1.3 Caller ID
19.1.2 Tenant Service
Name
Specifies a name for the System Speed Dialing number.
830 PC Programming Manual
System Speed Dial in 14.6 PBX
System Speed Dial
Document Version 2016-03