Router Configuration-Setup-[1-2] Wan; Router Configuration-Setup-[1-2-1] Wan-Connection Settings - Panasonic KX-NS1000 Pc Programming Manual

27.2 Router Configuration—Setup—[1-2] WAN
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection
Settings
Connection Mode
Selects the connection mode of the WAN.
Default
DHCP
Value Range
Static IP, DHCP, PPPoE, Disable
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Static IP
Allows the PBX to assign a specific IP address.
If Static IP is selected for Connection Mode, this screen is displayed.
WAN IP Address
Specifies the IP address of the WAN.
Default
Blank
Value Range
Blank, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Subnet Mask
Specifies the subnet mask of the WAN.
Default
Blank
Value Range
Blank, 0–255.0–255.0–255.0–255 (except 0.0.0.0 and 255.255.255.255)
Maintenance Console Location
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Document Version 2016-03
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
PC Programming Manual 1099