Panasonic KX-NS1000 Pc Programming Manual page 737

Keep ring after FWD NA to CO
Specifies whether an extension continues to ring after forwarding an incoming call to an outside destination
via FWD N/A or FWD Busy N/A.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Programming Manual References
12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
Feature Manual References
7.1.6 FWD (Call Forwarding)
Remote FWD COS
Specifies the COS that allows the FWD setting on the extension to be changed from another extension. This
COS must then be set for the extensions that will remotely change the FWD setting.
Default
Disable
Value Range
Disable, 1-512
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Manual References
7.1.6 FWD (Call Forwarding)
Document Version 2016-03
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual 737