Panasonic KX-NS1000 Pc Programming Manual page 963

Auto Login Caller ID 1, 2
Specifies the telephone number from which the subscriber can automatically be logged in from. When Caller
ID information is received that matches one of these numbers, the caller (subscriber) is automatically logged
in to the mailbox. Note that this telephone number must be unique for each mailbox.
Default
Not stored
Value Range
Max. 20 digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Auto Login Caller ID Password Entry Requirement
Specifies if a password is required for entry when automatic login is performed using the Caller ID of the number
set in Auto Login Caller ID 1 or Auto Login Caller ID 2.
Default
Yes
Value Range
Yes, No
Notice
If this is set to "No", ensure that unauthorized third-parties are not allowed access to that mailbox using
the number assigned to Auto Login Caller ID 1 or Auto Login Caller ID 2.
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Auto Login DDI/DID
Specifies the DID number for Automatic Login. When the Unified Messaging system receives this DID number
from the PBX, the caller (subscriber) is automatically logged in to the mailbox. Note that this number must be
unique for each mailbox.
Default
Not stored
Document Version 2016-03
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PC Programming Manual 963