Panasonic KX-NS1000 Pc Programming Manual page 863

TRG Priority
Selects the order in which trunk groups are seized when making calls via each carrier.
Trunk Group—Priority 1–Priority 4
Specifies which trunk group is seized in the order of priority 1 to priority 4.
Default
None
Value Range
None, 1–96
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
TRG 01–TRG 96
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 96
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled for use
with that carrier.
Default
TRG 01–04: ON
All other trunk groups: OFF
Value Range
OFF (white), ON (blue)
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-dialed
number by specifying "A" command in
Document Version 2016-03
16.5 PBX Configuration—[8-5] ARS—Carrier
Modify Command on the Carrier tab.
PC Programming Manual 863