Single Co Line Access - Panasonic KX-NS1000 Pc Programming Manual

Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Manager—
Feature Manual References
14.1.2 OGM (Outgoing Message)

Single CO Line Access

Specifies the feature number used to make a CO line call using a certain CO line.
Default
*37
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Manual References
4.1.16 CO Line Access
Parallel Telephone (Ring) Mode Set / Cancel
Specifies the feature number used to set or cancel an SLT connected in parallel with a DPT to ring when
receiving an incoming call.
Note
This feature is restricted to extensions connected to legacy gateway PBXs. For information about
connecting SLTs and DPTs in parallel, refer to the documentation of the connected legacy gateway PBX.
Default
*39
Document Version 2016-03
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Manager
PC Programming Manual 525