Value Range
Enable, Disable
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Destination IP Address
Specifies the destination IP address for ICMP echo requests.
If Disable is selected for
Default
Not stored
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Interval (s)
Specifies the interval of the polling timer used for sending ICMP echo requests.
Default
30
Value Range
1–3600 s
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Fail Count
Specifies the maximum count of ICMP echo failures.
If Disable is selected for
Default
2
Value Range
1–255
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Document Version 2016-03
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
ICMP Keep-Alive Enabled, this setting cannot be specified.
ICMP Keep-Alive Enabled, this setting cannot be specified.
PC Programming Manual
1113