Panasonic KX-NS1000 Pc Programming Manual page 635

Tables assigned to the trunk group. The modified number will then be recorded, and it is used for sending to
the network as a CLIP number.
A maximum of 4 CLIP Modification Tables can be programmed. Select the desired table from the Modification
Table list.
Removed Number of Digits
Specifies the number of leading digits to be removed from the incoming caller's number for each type of network
numbering plan.
Default
International: 0
National: 0
Subscriber: 0
Value Range
0–9
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—
Number—Type of Number—Public, Private
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—
of Number—Public, Private
Feature Manual References
4.1.3 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits for each
type of network numbering plan.
Default
International: 011
National: Not stored.
Subscriber: Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Document Version 2016-03
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Calling Party
Called Party Number—Type
PC Programming Manual 635