Table 36: Authentication Commands - Edge-Core ECS4620-28P Cli Reference Manual

8
Authentication Commands
You can configure this switch to authenticate users logging into the system for
management access using local or remote authentication methods. Port-based
authentication using IEEE 802.1X can also be configured to control either
management access to the uplink ports or client access

Table 36: Authentication Commands

Command Group
User Accounts and
Privilege Levels
Authentication Sequence
RADIUS Client
TACACS+ Client
AAA
Web Server
Telnet Server
Secure Shell
802.1X Port Authentication
Management IP Filter
PPPoE Intermediate Agent
3. For other methods of controlling client access, see
page 311.
Function
Configures the basic user names and passwords for management
access, and assigns a privilege level to specified command groups or
individual commands
Defines logon authentication method and precedence
Configures settings for authentication via a RADIUS server
Configures settings for authentication via a TACACS+ server
Configures authentication, authorization, and accounting for network
access
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Configures host authentication on specific ports using 802.1X
Configures IP addresses that are allowed management access
Configures relay parameters required for sending authentication
messages between a client and broadband remote access servers
– 243 –
3
to the data ports.
"General Security Measures" on